Service call indications – Brother HL 5370DW User Manual

Page 92

Advertising
background image

Control Panel

82

4

Service call indications

4

If there is an error that cannot be cleared by the user, the printer will show that a service call is needed by
lighting up all the LEDs as shown below.

If you see the service call indication shown above, turn off the power switch, and then turn it back on and try
to print again.
If the error is not cleared after turning the power switch off and then back on, press Go and Job Cancel
together, the LEDs will light up as shown in the table below to identify the error.
LED error indication

4

1

If this error occurs, turn off the printer power switch, wait a few seconds, and then turn it on again. Leave the printer for 15 minutes with the power
on. If the error occurs again, call your dealer or Brother Customer Service.

LEDs

Fuser unit

failure

1

Main PCB

failure

Laser unit

failure

Main motor

failure

High

voltage

failure

DIMM

error

FAN Failure

Back
Cover
Toner

Drum

Paper

Status

Advertising
This manual is related to the following products: