Yamato Scientific DNF 910 Constant Temperature Ovens User Manual
Page 3
Contents
Cautions in Using with Safety................................................................ 1
•
Explanation.................................................................................................................... 1
•
Table of Illustrated Symbols .......................................................................................... 2
•
Fundamental Matters of "WARNING!" and "CAUTION!"............................................... 3
Before Using this unit ............................................................................. 4
•
Requirements for Installation......................................................................................... 4
Description and Function of Each Part ................................................. 9
•
Main Unit ....................................................................................................................... 9
•
Control Panel............................................................................................................... 12
Operation Method ................................................................................. 13
•
Key Operation Chart of Mode Setting and Program Registering ................................ 13
•
Operation Mode and Function List .............................................................................. 14
•
Fixed Temperature Operation...................................................................................... 15
•
Auto Stop Operation.................................................................................................... 17
•
Auto Start Operation.................................................................................................... 20
•
Program Operation...................................................................................................... 22
•
Input Program.............................................................................................................. 25
•
Input Program; Set the Temperature ........................................................................... 27
•
Input Program; Set the Time ....................................................................................... 28
•
Input Program; Set the Fan Rotation Speed ............................................................... 29
•
Input Program; Set the Repeat Initiating Step ............................................................. 30
•
Input Program; Set the Repeat Count ......................................................................... 31
•
Input Program; Insert Step .......................................................................................... 32
•
Input Program; Add Step ............................................................................................. 33
•
Input Program; Delete Step......................................................................................... 34
•
Input Program; End Program ...................................................................................... 35
•
Program Creation Method ........................................................................................... 36
•
Programming Preparation Form.................................................................................. 42
•
Set the Timer Mode ..................................................................................................... 43
•
Set the Key Lock Mode ............................................................................................... 44
•
Set the Buzzer Mode................................................................................................... 45
•
Calibration Offset Function.......................................................................................... 46
•
Integrating Operation Time.......................................................................................... 47
•
Set Clock ..................................................................................................................... 48
•
Set Fan Operation at Wait State.................................................................................. 50
•
Set the Fan Rotation Speed ........................................................................................ 51
•
Set the Communication Lockout Mode (Optional accessory) ..................................... 52
•
How to Operate the Damper ....................................................................................... 53
•
The Independent Overheating Prevention Device ...................................................... 54
•
Temperature Rise/Fall Data (Reference Data) ............................................................ 55