Yamato Scientific DNF 910 Constant Temperature Ovens - Manual (Page 35)

31
Operation Method
Input Program; Set the Repeat Count
1 Repeat count setting procedure
①
Select the "Rep. count" and press the ENTER key. The setting edition screen is displayed. The
blinking "" (cursor) goes out and the setting value blinks instead.
Rep. count ► Endless
S07
Rep. count Endless
S07
ENTER
(Selection screen)
→
(Edition screen)
②
Select the value using "▼▲" and press the ENTER key. The setting is decided and the screen
returns to the setting item selection screen.
TROUBLE
ENTER CANCEL
DOOR Rep. count 1
S07
→
TROUBLE
ENTER CANCEL
DOOR Rep. count 1
S07
(Decide the input) (Selection screen)
③
Press the CANCEL key to cancel the input. The value is cancelled and the screen returns to the
setting item selection screen.
TROUBLE
ENTER CANCEL
DOOR Rep. count 3
S07
→
TROUBLE
ENTER CANCEL
DOOR Rep. count Endless
S07
(Cancel the input) (Selection screen)
④
Press the PROGRAM key to display the next selection screen after the repeat count setting is
completed.