Yamato Scientific IM400W Shaking incubator - Manual (Page 16)

14
Operation
Placing Flasks
„
Placing Flasks
① Open the door and confirm that shaking has stopped.
② Swing the handle out and turn it clockwise 90 degrees, and then draw out the table.
③ Hold the tray on the table with both hands and lift it off of the table. Note that the tray does not always have to
be removed when placing or taking out flasks.
④ Remove the clamp ring from the clamp
⑤ Place a flask in the middle of the clamp so it will sit properly. The clamp closes naturally.
Drawer handle
Drawer handle
Turn it clockwise 90 degrees.
Swing the handle
t
Drawer handle
Handle
Table
Tray sitting on the table
Clamp ring
Clamp
Clamp ring
Clamp
Flask