Yamato Scientific RE400 Evaporators, Rotary - Manual (Page 11)

9
How to Assemble
8. Fit both distilling flask and receiver flask.
● ● ● ● Distilling Flask
Connect the flask to the rotary joint, and hold
by the distilling flask clamp.
● ● ● ● Receiver Flask
Joint the flask to the cooling tube or the
connecting pipe, and hold by the flask clamp.
● How to use the (blue) flask remover
Use the flask remover if the distilling flask wouldn’t comes off easily from the rotary joint.
Put the flask remover to the end of flask and turn left. You can push out the flask easily without
giving too much force.
＊ ＊ ＊ ＊ If you pat the flask to remove, the glass apparatus could break. Use the flask remover
in case the flask wouldn’t comes off.
9. Fit the cock with teflon tube to the cooling tube or connecting pipe.
Then you had completed the assembly.
Flask Remover