3D Robotics IRIS Plus - Manual (Page 5)

03
Parts
Controller
your direct link to IRIS
Ground station radio
with USB and Android adapters
Slide out the leg to remove it, and replace with the tall leg.
Tighten the set screw until it sits flush with the surface.
Do not tighten the screw beyond this point.
Use the small (1.5 mm) hex
key to loosen the set screw
in the bottom of the leg.
Battery kit
battery, guard bag, and charger
with international travel adapters
Propellers and tool kit
four propellers with propeller tool and
small, medium, and large hex keys
(1.5 mm, 2 mm, and 3 mm)
Tall legs
Switch to tall legs to use IRIS with the Tarot
Gimbal or for extra clearance on landing.