3D Robotics RTF Aero - Manual (Page 20)

20
GPS
Command modes
Use command modes to enter into an automatic flight pattern.
Once set to a command mode, the Aero will continue to follow
the specified pattern until otherwise directed. Command modes
require GPS lock prior to takeoff.
GPS lock required
Loiter mode: GPS-positioned circling
» The Aero will enter into a circle pattern with a radius of
60 meters at the current altitude.
» Move the right stick to adjust the position of the circle.
Return-to-launch mode: circling over launch point
» The Aero will return to the position where it acquired GPS lock
and enter into a circle pattern at an altitude of 100 meters.
GPS
GPS lock required