3D Robotics X8 Ready-to-Fly 2013 - Manual (Page 7)

left stick right stick
Control your copter in flight using the
transmitter’s left and right sticks. Navigate
by orienting the blue arms to face forward.
After landing, disarm the motors by
holding the left stick bottom/left until
the motors stop.
6
Lower left stick to descend.
Set stick fully down to land
when close to the ground.
Raise left stick to take
off and gain altitude.
Move left stick left
and right to rotate.
Use right stick to fly forward,
backward, left, and right.
Set left stick to
center to hover.
L
R R L
L
L
7
Once the motors are disarmed, disconnect the
battery. Once the copter is powered off, turn off
the transmitter.
Follow these steps every time you fly.
8