3D Robotics Tarot gimbal - Manual

TAROT GIMBAL
Tarot brushless gimbal with
mounting plate
Two mounting screws
1 Attach tall legs
IRIS’ four tall legs allow for a safe landing with the gimbal. Attach the two
black legs to IRIS’ black arms and the two blue legs to IRIS’ blue arms.
Four tall legs with mounting clips, bolts,
and nuts
Add the clip onto the bolt with the notch hooked into
the notch in the arm.
Turn IRIS upside down, and set the leg into the notches on the bottom of
the arm. Orient the leg near the motor and with the point in the leg facing
towards the body of IRIS as shown below.
1
2