3D Robotics RTF Aero OSD User Manual

Rtf aero fpv/osd kit, Wire and power receiver

background image


AV receiver


Two 900 mAh

LiPo batteries

Thank you for purchasing a OSD/FPV Kit with your RTF Aero!

Your new, lightweight video setup allows you to capture onboard video from the

Aero using a compact camera, overlay the video with important data from your

autopilot, and transmit the video in flight. This kit does not include a device to view

your video. Please see the section on

page 4

for different options for viewing

the video transmitted by your kit.

Wire and power receiver

Attach an antenna to the receiver. Connect the AV output cable to either receiver

AV OUT port. Connect the RC power cable to the receiver DC IN port, and attach

a battery to the red connector.

Receiver cables

This manual is related to the following products: