Support camera specifications, Osd specifications, Receiver specifications – 3D Robotics RTF Aero OSD User Manual
Page 5
For customer support, contact us at
or call our support line at
+1 (858) 225-1414
Monday through Friday, from 8 am to 5 pm, PST.
Aero OSD/FPV Kit Manual B | ©3D Robotics, Inc. | 26 June 2014
Support
Camera specifications
»
Image device: 1/3” Sony Super HAD Color CCD
»
Horizontal resolution: 520 TV line.
»
Minimum illumination: 0.1 Lux
»
Number of pixels: NTSC: 768(H) x 492(V)
»
Scanning system: PAL: 625 lines, 50 field/sec; NTSC: 525 lines, 60 field/sec.
»
Sync system: Internal synchronization
»
Video output: 1Vp-p 75 Oms , Negative
»
White balance: Auto
»
S/N ratio: More than 48 dB (AGC off)
»
Gamma characteristic: 0.45
»
Electronic shutter: PAL : 1/50~1/100,000 sec; NTSC : 1/60~1/100,000 sec, auto
»
Lens option: Pinhole lens, board lens, wide angle lens, vari-focal lens available.
»
Power consumption: 12V±10%DC, 50mA.
»
Operation temperature: -10° ~ + 50°, RH 95% Max.
»
Storage temperature: -20° ~ + 60°, RH 95% Max.
»
Dimension: 20x20 mm
»
Weight: 1.1 oz
OSD specifications
»
ATmega328P with Arduino bootloader
»
MAX7456 monochrome on-screen display
»
FTDI cable compatible pinout
»
Standard 6-pin ISP header
»
Two independent power sections with an LED indicator on each
»
Solder jumpers for combining the power sections
»
+5V 500 mA regulator for up to +12V supply input
»
Solder jumper for PAL video option
»
Exposed test points for HSYNC and LOS
»
Dimensions: 0.7”W x 1.7”L (2.4” w/ pins as shown) x 0.3”H
»
5.8 GHz Wireless AV Receiver
»
Receiving Frequency: 5705-5945 MHz / 8 CH
»
Receiving Sensitivity: -90 dBm
»
Antenna connector: RP-SMA
»
Power supply voltage: DC 7-12V
»
Supply current: 150 mA
»
Dimension: 61*52*13 mm
Receiver specifications