3D Robotics RTF Aero OSD - Manual (Page 3)

Charging the batteries
Connect charger to the power adapter cable and a wall outlet. Connect the red
cable to the + port and the black cable to the - port.
Set the charger to LiPo and 1A.
Connect the white battery connector to the 3S port, and connect
the XT60-JST charger adapter to the red battery connector and yellow
charger connector.
+
–
LiPo 1A
Secure battery inside the guard bag while charging.
Charge until the status indicator displays green.
Charging Complete
LIPO 1A
3S port