B&B Electronics RS-232 Digital Relay I/O 232DRIO - Manual (Page 24)

22 232DRIO-0308 Manual
B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350
PH (815) 433-5100 -- FAX (815) 433-5104
Demonstration Program
The Demonstration Programs (IBM PC or Compatible) provide
the user with examples of how to receive and transmit commands to
the 232DRIO. The DEMO232.EXE is the executable program and
the DEMO232.BAS file is the source code in QuickBasic. The
DEMO232.EXE is the executable program and the DEMO232.CPP
file is the source code in C/C++. The source codes provide an
illustration of how to send and receive commands from the
232DRIO.
NOTE: This is a demonstration program only and not intended for
system applications.
Running Demonstration Program
Before you can run the demonstration program you must run the
install program in the Hard Drive Installation section. If you are
running Windows, exit Windows to DOS.
To run the program follow these steps from the DOS prompt:
QuickBasic
1.
Type CD \BASIC and press the <ENTER> key.
2. Type DEMO232 and press the <ENTER> key.
C/C++
1.
Type CD \BC and press the <ENTER> key.
2. Type DEMO232 and press the <ENTER> key.