Belkin DESKTOP CARD F5D7001 - Manual (Page 12)

11 10
Installing and Setting up the Card
11 10
Installing and Setting up the Card
2.5
Remove the metal port cover from
the back of the computer that
corresponds to the PCI slot you
selected. If there is a screw, place
it in a safe place, as you will be
using it to attach the Card to the
computer later.
2.6
Push the Card firmly into the PCI
slot that you have chosen. Apply
pressure as needed until the
connector is fully seated.
2.7
Now secure the Card with the
screw that you previously placed
in a safe place.
2.8
Carefully screw the antenna onto
the threaded connector on the
Card. Turn the antenna until it is
vertical and pointing up.
2.9
Replace the computer’s cover.
Now that the Card is installed, you
can reconnect the power cord,
and turn it back on.
Step 3 Let Windows Finish the Installation
3.1 After powering on your computer,
you will see a “Found New
Hardware Wizard” screen. Select
“Install the software automatically
(Recommended)” and click “Next”.
Note:
Specific screens differ
depending upon which version of
the Windows OS you are using.
Step 3 Let Windows Finish the Installation