Belkin DESKTOP CARD F5D7001 - Manual (Page 13)

11
Installing and Setting up the Card
11
se
ct
io
n
1
2
3
4
5
6
3.2
Depending on the version of
Windows you are using, you
might also see a screen similar to
this one. This DOES NOT mean
there is a problem as the drivers
have been fully tested and are
compatible with this Windows
operating system. Select “Continue
Anyway” and follow the on-screen
instructions.
3.3
Windows will ask you where the
drivers are located. Make no
changes and click “Next” until
you see the screen that asks you
to click “Finish” to complete the
installation.
Note: Specific screens differ
depending upon which version of
the Windows OS you are using.
3.4 When the installation is complete,
a small Signal Indicator icon
(red) in your system tray (bottom
right corner of most screens) will
appear. Double-click the Signal
Indicator icon to bring up the
“Wireless Network” screen.
3.5
Select the network you want
to connect to under “Available
Networks” and click “Connect”.
3.6
The Signal Indicator icon in your
system tray should now turn green
(yellow if the signal is weak.)
Installation is now complete!