Adding audio from your cable or satellite box – Bose AM314478 User Manual
Page 36
32
C
OMPLETE
S
YSTEM
C
ONNECTIONS
English
TAB 6
TAB 8
TAB 7
TAB 3
TAB 5
TAB 2
TAB 4
Adding audio from your cable or
satellite box
You need to make this connection regardless of the
type of video connection (HDMI for example) you used.
This carries the audio from your device to your Bose
®
system speakers.
1.
Check your cable or satellite box connection panel
to locate the Audio Out connectors.
2.
Identify the stereo audio cable to use:
a. If a stereo audio cable still connects the box to
your TV, refer to “Disconnecting your devices
from the TV” on page 25. Proceed to b, below.
b. If the cable connected to the box is free at one
end (disconnected from the TV), proceed to
step 3.
c. If a stereo audio cable is not yet attached, use
the cable provided by Bose and connect one
end to the Audio Out connector on your box.
3.
Locate the Audio IN connectors that are labeled
CBL•SAT on the back of the media center.
These connectors are between the VCR and AUX
Audio IN connectors.
4.
Insert the free end of the stereo cable into the top
two connectors.
Be sure to match the colors on the plugs to the
connector colors: red to red (R) and white to
white (L).
White
Red
White
Red
Be sure to match the
colors on the plugs to
the connector colors:
red to red (R) and white
to white (L).
00.LIV_IG.book Page 32 Monday, January 12, 2009 10:58 AM