Connecting the system to power – Bose AM314478 User Manual
Page 43
39
C
OMPLETE
S
YSTEM
C
ONNECTIONS
TAB 5
TAB 4
TAB 6
TAB 8
TAB 7
English
TAB 3
TAB 2
1.
Plug the free end of the VS-2 power cord into an
AC (mains) outlet.
2.
Place the power supply on the floor well below the
media center.
If you are using a plasma TV, move the power
supply as far from your TV as is practical.
3.
Plug the free end of the Acoustimass
®
power cord
into an AC (mains) outlet.
Note: Bose recommends using a high-quality surge
suppressor on all electronics equipment. Such suppres-
sors can eliminate the vast majority of failures attributed
to surges and may be purchased at electronics stores.
Voltage variations and spikes can damage electronic
components in any system, resulting in damage not
covered by the limited warranty.
4.
Continue with
on the next page for getting the
remote control ready.
11
Connecting
the system
to power
10
00.LIV_IG.book Page 39 Monday, January 12, 2009 10:58 AM