Brother HL-3400CN - Manual (Page 142)

CHAPTER 4 CONTROL PANEL
4–71
MANUAL MODE
This printer has no manual feed tray or multi-purpose tray. Therefore you
cannot feed special paper in the usual way. However this printer has a
special Manual Feed Mode with Tray 1 to accommodate non-standard
paper sizes. When “MANUAL MODE=ON” is selected or a manual feed
command is sent to the printer, the printer will wait for you to replace the
paper in Tray 1 with the paper for manual printing.
1. Press the ▲ or ▼ button to select the manual mode on or off.
2. Press the Set button to make the setting effective.
MEDIA TYPE
When you use anything other than ordinary plain paper(such as thick
bond paper, envelope, or transparency), the appropriate media type must
be selected in the media type mode to get the best print quality.
1. Press the Set button to enter the media type mode. The display
then shows the current setting with an asterisk.
2. Press the ▲ or ▼ button to select regular, thick paper or
transparency then press the Set button to make the setting
effective.
✒ Note
•
Please do not forget to change the setting back to regular after you
have printed on your special media with the setting changed.