Brother Copier/Printer MFC-895DW - Manual (Page 22)

10
2
Loading paper and
print media
2
The machine can feed paper from the
standard paper tray, optional lower tray or
multi-purpose tray.
When you put paper into the paper tray, note
the following:
 If your application software supports
paper size selection on the print menu,
you can select it through the software. If
your application software does not
support it, you can set the paper size in
the printer driver or by using the control
panel buttons.
Loading paper in the standard
paper tray and the optional
lower tray
2
You can load up to 500 sheets in the standard
paper tray (Tray 1) and 500 sheets in the
optional lower tray (Tray 2)
1
. Paper can be
loaded up to the maximum paper mark
(
) on the right-hand side of the paper
tray. (For recommended paper to use,
seeAcceptable paper and other print media
uu
page 20.)
1 Tray 2 is standard on MFC-8950DWT.
Printing on plain paper, thin paper or
recycled paper from Tray 1 and Tray 2
2
a
Pull the paper tray completely out of the
machine.
b
While pressing the green paper-guide
release lever (1), slide the paper guides
to fit the paper you are loading in the
tray. Make sure that the guides are
firmly in the slots.
Loading paper
2
1
1