Brother Copier/Printer MFC-895DW - Manual (Page 29)

Loading paper
17
2
Paper settings
2
Paper Size and Type
2
Note
You can use four sizes of paper for
printing faxes: Letter, A4, Legal or Folio.
When you change the size of paper in the
tray, you will also need to change the setting
for paper size at the same time so your
machine can fit the document or an incoming
fax on the page.
You can use the following sizes of paper for
printing copies: Letter, A4, Legal, Executive,
A5, A5 L, A6, B5, B6 and Folio and the
following sizes for printing faxes: Letter, A4,
Legal or Folio (8.5 in.
× 13 in.).
After you set the paper size setting, you can
set up the machine for the type of paper you
are using. This will give you the best print
quality.
a
Press Menu.
b
Press a or b to display
General Setup
.
Press General Setup.
c
Press a or b to display Tray Setting.
Press Tray Setting.
d
Do one of the following:
 To set the paper type for the
MP Tray
press a or b to display
MP Tray
.
Press MP Tray
 To set the paper type for Tray#1
press a or b to display Tray#1.
Press Tray#1
 To set the paper type for Tray#2
press a or b to display Tray#2.
Press Tray#2
1
if you installed
Tray 2.
e
Press d or c to display the paper size
options.
Press Letter, A4, Legal,
Executive
, A5, A5 L
3
, A6
3
, B5, B6,
Folio
or Any
2
.
f
Press Thin, Plain, Thick, Thicker,
Recycled Paper
or Label
4
.
g
Press Stop/Exit.
1 The Tray#2 button will be selectable if Tray 2 is
installed.
2
Any
size appears only when you choose the MP tray.
3
A5 L
and A6 size are not available for Tray#2.
4 You can choose Label for the MP Tray.
Note
If you choose Any for the MP Tray Paper
Size: You must choose MP Only for the
Tray Use setting. You cannot use the Any
Paper Size selection for the MP tray when
making N in 1 copies. You must choose
one of the other available Paper Size
selections for the MP tray.