Shutdown kt emulation */ cprintf("taking kt emu, Example code for interrupt messaging, Interrupt driven test */ cprintf("running emula – Rockwell Automation D17846.2.4 CONTROLNET KT EMULA User Manual

Page 33: Hold the card in reset while the interrupt syst, Set the card up to interrupt on irq5 */ outport, Setup the interrupt vector */ oldhandler = getv, Unmask the interrupt */ outport(0x20+1, inport, Inumints=0, Release the ktc. this will activate the card, There should be at least one interrupt at this

Advertising
Shutdown kt emulation */ cprintf("taking kt emu, Example code for interrupt messaging, Interrupt driven test */ cprintf("running emula | Hold the card in reset while the interrupt syst, Set the card up to interrupt on irq5 */ outport, Setup the interrupt vector */ oldhandler = getv, Unmask the interrupt */ outport(0x20+1, inport, Inumints=0, Release the ktc. this will activate the card, There should be at least one interrupt at this | Rockwell Automation D17846.2.4 CONTROLNET KT EMULA User Manual | Page 33 / 48 Shutdown kt emulation */ cprintf("taking kt emu, Example code for interrupt messaging, Interrupt driven test */ cprintf("running emula | Hold the card in reset while the interrupt syst, Set the card up to interrupt on irq5 */ outport, Setup the interrupt vector */ oldhandler = getv, Unmask the interrupt */ outport(0x20+1, inport, Inumints=0, Release the ktc. this will activate the card, There should be at least one interrupt at this | Rockwell Automation D17846.2.4 CONTROLNET KT EMULA User Manual | Page 33 / 48
Advertising
See also other documents in the category Rockwell Automation Equipment: