Bosch Maxx WTL 6500 - Manual (Page 10)

10
Before drying 0.
1. Open the door.
2. Place the laundry in the drum.
3. Close the door.
4. Select a programme using the programme selecĆ
tor (see the table of programmes from page 16
onwards).
5. Set additional functions if required (see page 18).
6. Press the Start/Stop button.
Inserting/removing laundry n0.
1. Open the door.
The drying cycle is halted.
2. Add or remove laundry.
3. Close the door.
4. Select another programme if necessary using the
programme selector (see the table of programĆ
mes from page 16 onwards).
5. Set additional functions if required (see page 18).
6. Press the Start/Stop button.
After drying 0.
1. Open the door.
2. Remove the laundry.
3. Turn the programme selector to Off.
4. Clean the filter (see page 30).
5. Empty the water container (see page 31).
Summary of
instructions