Bosch Maxx WTL 6500 - Manual (Page 43)

43
The door catch can be reversed if necessary.
The door is hinged on the right at the factory.
You will need:
0.
- Torx screwdrivers, sizes T10 and T20.
- MediumĆsized slotted screwdriver.
These are available from specialist suppliers.
Carefully tighten all screws by hand. They could otherĆ
wise be overtightened.
d
Do not use a power screwdriver.
To remove the door:
!
Place the door on something soft (e.g. a blanket)
so that it is not damaged.
1. Undo the screw for the bottom door hinge.
2. Hold the door firmly and unscrew the top door hinĆ
ge.
3. Pull the door and the hinge outwards to the front.
4. Lay the door on the blanket.
Reversing the door
catch