Flashing power light – Bose Soundlink AM323699 User Manual
Page 11
7
Tab 6, 14
English
Tab 2, 10
Tab 3, 11
Tab 4, 12
Tab 5, 13
Tab 8, 16
Tab 7, 15
3. Check to be sure the SoundLink
TM
USB key power light turns on and begins to flash.
4. Wait for your computer to recognize the SoundLink
TM
USB key. It may take up to 20
seconds the first time this occurs.
CONNECTING appears on the Acoustic Wave
®
system display and lights on the USB key
and SoundLink
TM
adapter flash rapidly. The lights stop blinking and the Acoustic Wave
®
system emits a brief beep when the SoundLink
TM
connection is ready for use.
5. For best performance, set your computer volume control to the maximum level you use.
Then open a music application or locate an Internet radio station and set the music to play.
Important for Mac computer users: On first using the USB key, you may need to open your
computer Sounds settings in System Preferences and select “Bose SoundLink Audio.”
Note: While listening to music from your computer, no sound plays through the computer’s internal
speakers or sound card. On some computers, you can choose a separate audio output for your
music and still hear computer alerts on its internal speakers.
Flashing
power light
SoundLink adapter_OG.book Page 7 Tuesday, July 7, 2009 11:39 AM