Bose Soundlink AM323699 - Manual (Page 16)

12
Tab 3, 11 Tab 8, 16 Tab 7, 15 Tab 6, 14 Tab 5, 13 Tab 4, 12 English Tab2, 10
Problem What to do
Computer and Acoustic Wave ® system
do not connect.
Symptom B:
CONNECTING remains on the
Acoustic Wave ® system display and
the adapter light blinks continuously.
– NO SIGNAL – eventually appears
on the display.
Or, see Symptom A on the previous
page.
• Make sure the USB key is plugged in and your computer is
turned on.
• Decrease the distance between the Acoustic Wave ® system and
your computer. See “Connection range” on page 17.
• Try moving the Acoustic Wave ® system away from possible
sources of interference such as another wireless device, a micro-
wave oven, or wireless computer network router.
• If you are using a desktop computer, try moving the USB key to a
port that provides a more direct path to the adapter. Or use a
USB extension cable, available for purchase at computer stores.
• Remove the USB key from your computer, wait 30 seconds, and
insert it again.
• Disconnect the power supply from the Acoustic Wave ® system
and reconnect it.
• Try restoring the wireless link between the speaker and the USB
key. See “Manually linking the SoundLink TM adapter and USB
key” on page 15.
SoundLink adapter_OG.book Page 12 Tuesday, July 7, 2009 11:39 AM