AJA Ki Pro Rack - Manual (Page 38)

Ki Pro Rack v4.2 www.aja.com 38
14.1 ENCODE TYPE This parameter defines the Apple ProRes encoding method if ProRes has been selected
as the encoding mode. These are the available options:
Or the following appears if 14.0 Encode Mode has been set to DNxHD. (These selections
are valid only if an HD source is used—1080p for DNxHD 36.)
NOTE: Unlike Apple ProRes 422, Avid DNxHD encoding does not provide support for standard
definition video. If standard definition video is input and an Avid DNxHD encode type has
been selected, a warning prompt will appear: "WARNING Change Encode Input not HD."
15.1 PLAY MEDIA This parameter determines behavior during playback. These are the available options:
15.2 LOOP PLAY This parameter turns looped playback on and off. These are the available options:
15.3 PLAYLIST This parameter displays the name of the selected playlist. These are the available options:
15.4 DROPPED FRAMES This parameter determines how playback handles dropped frames. These are the
available options:
ProRes 422 (default)
ProRes 422HQ
ProRes 422LT
ProRes 422PX Record media as Apple ProRes 422 files.
Record media as Apple ProRes 422 (HQ) files.
Record media as Apple ProRes 422 (LT) files.
Record media as Apple ProRes 422 (Proxy) files.
DNxHD 220x (default)
DNxHD 145
DNxHD 36 Record media as Avid DNxHD 220x files.
Record media as Avid DNxHD 145 files.
Record media as Avid DNxHD 36 files.
One (default)
All Playlist Plays one clip and then stops playback.
All/Playlist—Plays the current clip and then continues playing
the next clip on the Ki Pro media or the playlist. Note that
with this setting, Ki Pro will play clips back regardless of
format or framerate, but you may notice the video monitor
reset for format/framerate changes. If all clips are the same
format and framerate or conversion is applied to the output
for clips with the same Hz, then clips play out smoothly one
after another.
OFF (default)
ON Play clip(s) and then stop playback when complete.
Play clip(s) and then loop back and repeat playback
variable The name of the selected playlist appears. If no playlist is
selected via the web UI controls, then no name appears. The
user cannot select or create playlists from the front panel UI;
these tasks are handled using the web UI.
CONTINUE
STOP In the unlikely event that the playback of a clip(s) begins to
drop frames, this parameter allows users to define whether
the playback continues or stops.