AJA Ki Pro Rack - Manual (Page 45)

Ki Pro Rack v4.2 www.aja.com 45
NOTE: There is one converter available for input—if selected, it will be applied to the currently
selected input. Also, input conversion of 1080psf23.98 sources is not supported.
1.5 OUT CONVERT This parameter defines the type of up, down, cross, or aspect-ratio conversion, if any,
applied to the output when playing media from storage or while recording. These are the
available options:
NOTE: There is one converter available for output—if selected, it will be applied as appropriate,
based on other settings (1.6, 1.7 and 1.8) possibly affecting multiple outputs.
Output conversion of 1080psf23.98 is only supported for SD (not 720p).
1.6 SDI OUT This parameter defines whether the SDI output matches the file format or has the 1.5
OUT CONVERT selection applied to it. These are the available options:
NOTE: The “FILE FRMT” (file format) is from the file on playback and is the result of any input
conversion (or none) applied during capture.
1.6 SDI 2 OUT This parameter defines whether the SDI 2 output matches the file format or has the 1.5
OUT CONVERT selection applied to it. These are the available options:
NOTE: The “FILE FRMT” (file format) is from the file on playback and is the result of any input
conversion (or none) applied during capture.
1.7 COMPONENT OUT This parameter defines whether the component video output matches the file format or
has the 1.5 OUT CONVERT selection applied to it. These are the available options:
NOTE: Setting the Ki Pro Rack component input and/or output to "Beta" for HD material causes an
"Invalid Selection" alarm requiring correction before operations can continue.
1.8 HDMI OUT This parameter defines whether the HDMI output matches the file format or has the 1.5
OUT CONVERT selection applied to it. These are the available options:
NONE (default)
SD
HD 720
HD 1080 No conversion on output.
Convert on output to SD
Convert on output to HD 720
Convert on output to HD 1080.
FILE FRMT (default)
OUT CONVERT Output with the same format as the file
Output using the selection in 1.5 OUT CONVERT
FILE FRMT (default)
OUT CONVERT Output with the same format as the file
Output using the selection in 1.5 OUT CONVERT
FILE FRMT (default)
OUT CONVERT
CVBS ON Y Output with the same format as the file
Output using the selection in 1.5 OUT CONVERT
Forces SD Out Convert if HD
FILE FRMT (default)
OUT CONVERT FRMT Output with the same format as the file
Output using the selection in 1.5 OUT CONVERT