AJA FS2 Quick Start - Manual (Page 8)

8
Sidebar Video The following quick workflow shows you how to create sidebar edges filled with video.
The setup is:
• SDI 1 Input feeds Processor 1 foreground.
Use an SD 525 input on SDI 1; it will be upconverted to 1080i59.
• SDI 2 Input feeds Processor 2, which will provide Processor 1 background.
Use an HD input signal in SDI2.
• Processor 1 feeds SDI1 Output (center video with sidebar video).
• Processor 2 feeds SDI2 Output (showing the sidebar video signal alone).
The parameter settings are:
• Video 1 Input set to SDI 1.
• Output Format set to 1080i59.94.
• Video Output Mode set to Normal.
• Upconvert Mode set to 4x3 Pillar.
• Custom Size/Pos set to Off.
• Background Fill set to Video 2.
The menu operations for this workflow are:
1. Press the Video 1 button.
a. Select 1 Video 1 Input, and adjust to SDI 1.
b. Select 2 Output Format, and adjust to 1080i59.94.
c. Select 3 Video Output Mode, and adjust to Normal.
d. Select 6 Upconvert Mode, and adjust to 4x3 Pillar.
e. Select 4 Background Fill, and adjust sidebar video to Video 2.
e. Select 9 Sidebar Edge, and adjust sidebar position as you prefer.
g. Select 13.0 Custom Size/Pos, and adjust to Off.
2. Press the Video 2 button.
a. Select 1 Video 2 Input and adjust to SDI2.
b. Select 2 Output Format and adjust to 1080i59.94.