AJA KUMO CP - Manual (Page 20)

KUMO v3.1 www.aja.com 20
Figure 12. KUMO LAN with Web Browser UI
Setup and Control
Methods
Regardless of direct connection or LAN connection, KUMOs are controlled over a
network by connecting to KUMO’s internal webserver with a standard web browser on a
Mac or PC. To do this you first need to establish a network connection between the
computer and the KUMO to be controlled. There are various methods supported for
doing this depending on the operating system and/or web browser being used. Choose
one of the following quick-start procedures that best fits your environment; each
procedure is presented in step-by-step form later on these pages.
Mac OSX:
• Setup and Control from a Safari Browser on Mac OSX using Bonjour
• Setup and Control from a Browser on Mac OSX using a Static IP Address
Windows 7:
• Setup and Control from a Browser on Windows 7 using UPnP
• Setup and Control from a Firefox Browser on Windows 7 using Bonjour
• Setup and Control from a Browser on Windows 7 using a Static IP Address
Windows XP:
• Setup and Control from a Browser on Windows XP using UPnP
• Setup and Control from a Firefox Browser on Windows XP using Bonjour
• Setup and Control from a Browser on Windows XP using a Static IP Address
All of the above methods are explained on the following pages. Select the method that
works the best for you and your environment.