AJA KUMO CP - Manual (Page 32)

KUMO v3.1 www.aja.com 32
Figure 25. KUMO and KUMO CP with Web Browser UI Control.
TCP-IP Network
Connection
KUMO supports traditional TCP-IP networking through DHCP or Static IP addressing.
IMPORTANT: When using KUMO in a DHCP or Static IP addressed network, it is best to select and
maintain a consistent network scheme. If a mixture of DHCP and Static IP addresses are
used, inconsistent performance can result. The most stable operation is achieved when
all IP addressing is either DHCP or Static.
Default DHCP
Configuration
DHCP is the default initial configuration routine for KUMO devices. If you start up on a
DHCP network, KUMO will accept assigned IP addresses. After DHCP initialization, use
your zeroconf browser to view the KUMO webpage and view the assigned IP address.
Static IP Configuration If your IT administrator prefers an assigned IP address that is fixed (called a “Static IP), you
will need to set network parameters using the KUMO UI Network page where you will
enter:
• IP address type—Static IP
• a unique IP address
• the Subnet Mask and default gateway IP address (your LAN’s internet router)