AJA FS2 - Manual (Page 68)

68
CONFIG Menu Group
The CONFIG Menu Group includes parameters for setting up the FS2’s network,
system name, SNMP, alarm, and screensaver configurations.
1 System Name This parameter defines a unique name for the FS2. This same name is used both
when displaying systems via the web interface and when displaying the FS2’s
screen saver.
Note: Set the name as follows:
Push ADJUST momentarily to enter character editing mode.
Turn SELECT to advance the blinking cursor to each character.
Turn ADJUST to scroll through the choices for each character. These characters are
allowed: A through Z (uppercase), a through z (lowercase), numerals, hyphen (-),
and period (.). Leave the desired character selected and advance to the next one.
Push ADJUST to save and activate the name after all characters are defined, or to
abandon changes before saving, push SELECT. To return to the default name at
any time, hold down ADJUST.
To eliminate trailing spaces or characters in order to shorten an existing system
name, overwrite them with a hyphen (-). Spaces cannot be entered from the front
panel but must be entered through the browser.
2.1 IP Config This parameter determines the type of TCP/IP network configuration used by the
FS2. (Networking is discussed in Chapter 3, Network Connection.) Consult your
network administrator about how to set this value.
1 System Name Selections Selection Descriptions
Variable Set the system name, up to 20 characters. (See the note below for details.)
Default: aja-FS2
2.1 IP Config Selections Selection Descriptions
DHCP (default)
Static Addr
Select automatic IP address assignment from the LAN DHCP server. If the
FS2 cannot find a DHCP server, it fails over to the static IP address.
Assign a static IP address manually (using parameters 2.2, 2.3, and 2.4).
The factory default static IP address: 192.168.0.2