AJA FS2 - Manual (Page 88)

88
9.1 SDI1 3G
Config The SDI13G Config parameter determines how 1080p50/60 signals are formatted for
the SDI 1 output. The first two choices select either "Level A” or "Level B” as
described in the SMPTE 425 standard. The third selection ties SDI 1 Out and SDI 2
Out together into a single 1.5 Gb Dual-link 1080p50/60 output. In this case, the SDI2
Video Out and SDI2 Audio Out selections are ignored.
9.2 SDI2 3G
Config The SDI2 3G Config parameter determines how 1080p50/60 signals are formatted
for the SDI 2 output. The two choices select either "Level A” or "Level B” as described
in the SMPTE 425 standard. (If the SDI1 selection is Dual Link, these SDI2 settings are
ignored because the SDI 2 output is used for dual link.)
10.1 Fiber1 3G
Config The Fiber1 3G Config parameter determines how 1080p50/60 signals are formatted
for the Fiber 1 output. The first two choices select either "Level A” or "Level B” as
described in the SMPTE 425 standard. The third selection ties Fiber 1 Out and Fiber 2
Out together into a single 1.5 Gb Dual-link 1080p50/60output. In this case, the
Fiber2 Video Out and Fiber2 Audio Out selections are ignored.
10.2 Fiber2 3G
Config The Fiber2 3G Config parameter determines how 1080p50/60 signals are formatted
for the Fiber 2 output. The two choices select either "Level A” or "Level B” as
described in the SMPTE 425 standard. (If the Fiber1 selection is Dual Link, these
Fiber2 settings are ignored because the Fiber 2 output is used for dual link.)
9.1 SDI1 3G Config Selections Selection Descriptions
3 Gb-Level A (default)
3 Gb Level-B
1.5 Gb Dual Link
Formats 3G SDI Output as Level A.
Formats 3G SDI Output as Level B.
Formats SDI 1 and SDI 2 as 1.5Gb "Dual Link."
9.2 SDI2 3G Config Selections Selection Descriptions
3 Gb-Level A (default)
3 Gb-Level B
Formats 3G SDI Output as Level A.
Formats 3G SDI Output as Level B.
10.1 Fiber1 3G Config Selections Selection Descriptions
3 Gb-A (default)
3 Gb-B
1.5 Gb Dual Link
Sends 3 Gb format A 1080p 50/60 to the Fiber1 output.
Sends 3 Gb format B 1080p 50/60 to the Fiber1 output.
Sends dual-link 1.5 Gb 1080p 50/60 to the Fiber1 and Fiber2 outputs.
As the term “dual-link” implies, the signals and outputs are tied
together.
10.2 Fiber2 3G Config Selections Selection Descriptions
3 Gb-Level A (default)
3 Gb-Level B
Formats 3G SDI Output as Level A.
Formats 3G SDI Output as Level B.