AJA KONA 5.0 - Manual (Page 57)

1
47 Using AJA’s Machina Application — Setup Window
Timebase
Use the Timebase pull-down menu to choose between:
• Frames
• Timecode (NDF)
• Timecode (DF)
• Reference
Using the Reference pull-down menu, select timing Reference source — Free Run, from External
(genlock), or from the video Input signal.
Device Control
Options Device Control Options set options for the RS-422 machine control interface on the KONA card.
These functions support Print-to-Tape machine control.
Machina Device Control Options
Timecode Format
Use this pull-down to select the timecode base supported by your VTR.
• Base 24
• Base 25
• Base 25 (50 frames per second)
• Base 30 DF (drop-frame, 30 frames per second)
• Base 30 NDF (non-drop-frame, 30 frames per second)
• Base 30 DF (drop-frame, 60 frames per second)
• Base 30 NDF (non-drop-frame, 60 frames per second)