Reference overlay options hdmi output options – AJA KONA 5.0 User Manual
Page 83
1
73
Using Adobe CS5 Applications — Premiere Pro Playback Options
Reference:
Select a source for the video reference signal:
•
Free Run (none)
•
Reference Input (LTC/Ref connector)
•
SDI Input
•
HDMI Input
Overlay Options
Enable and select overlay information to be included in the playback by checking the
appropriate boxes. These overlay controls allow you to insert a graphic file supporting alpha
channel transparency to apply an effect or insert a bug (logo) over the video content.
HDMI Output Options
HDMI video output offers these options:
•
Protocol – choose Auto Detect, HDMI, or DVI
•
Color Space – select Auto Detect or YCbCr 10bit (KONA does not support RGB)
•
Audio Channels – choose 8 or 2 to be embedded
•
Video Range – select SMPTE or Full Range
Advanced Options
Under the Shared Output pulldown, you have these options:
•
Normal– choose for normal output connector routing
•
Stereoscopic – select for use with Cineform First Light to control the 3D output. When
selected and used with KONA 3, the stereoscopic playback will be output on separate SDI
outputs, left and right. (For playback output on a single SDI output, you can configure
Cineform First Light to superimpose the left/right; see Cineform First Light documentation
for details).
•
Video + Key – choose this selection to output a video signal to one SDI output and a related
Key signal to a second SDI ouput (useful for outputting to a video switcher for example).