Apotop DW06 - Manual (Page 6)

(* 備註：本產品不含 iPad 電源供應器 )
1. PWR LED (Green):
Indicates ComWi is Power On for WiFi mode.
2. WiFi LED (Red):
Indicates the Wireless LAN is keeping in working stage.
3. Reset (3Sec) button under the Hole:
First, please make sure you had powered on the Wi
Router and WiFi LED (Red) is keeping in working stage,
then you can
use a kit to press the Reset button. After
pressing 3 seconds, you will see WiFi LED (Red) will
turn off. Currently, you can release the button for
recovering it to Default Network setting.
*Note: iPad Power Adapter is not included
主要功能介紹
/ Main Function
2.1
無線網路設定 /
Wireless Network Setup
如網路連線無須帳號密碼 / If need no User Name/ Password
1. 將 iPad 電源供應器組入 W-Router 的凹槽中的 USB 插頭，通電後
並等待約 25 秒。
Connect the Ethernet cable to the WAN port of Travel Wi-Router
2. 連接網路線至產品底部的 RJ-45 網路接口。
Connect the other end of the Ethernet cable to the internet port at
hotel room (or ISP router)