Autocue WinCue Pro News Nexus - Manual (Page 14)

Start Ignore: If this setting is checked then the control code used will be a signal
for WinCue to ignore the subsequent transferred code.
Stop Ignore: If this setting is checked then the control code used will be a signal
for WinCue to stop ignoring and to start using the subsequent transferred code.
Case Sensitive: If this setting is checked then the control code must be
received in the case specified in the Text Conversion settings in order for it to
be converted into a WinCue element.
Once you have entered the required information to the Text Conversion
Settings click on OK and the control code will be ready to convert the
newsroom system code into a WinCue element.
2.1.7 Code Page
Use the Code Page tab to select the code page that the newsroom system
that you will connect with the NEXUS interface uses.
2.1.8 Presenter Settings
The Presenter Settings and Presenter tabs are used to create and configure
Presenters that can be used in the prompted scripts, to find out about to
configure these see your WinCue Pro News User Guide.
WinCue Pro News Nexus User Guide 0BConfiguration
• 14