Autocue WinCue Pro News Nexus - Manual (Page 11)

Enter the newsroom system code details for each of the options then click on
the OK button and test them by sending a Runorder from the newsroom system
to WinCue.
2.1.5 Order List
The tab after On-Line Editing is the Order list tab; the settings here are related to
how WinCue translates the code from the newsroom system into the
downloaded scripts you see in the WinCue Script Editor.
Note: Before editing the available settings it is necessary that you have the
relevant information about your newsroom system's code.
The Order List settings are used in conjunction with the Story (Type 1) settings.
The code information that you add in this section will be what WinCue looks for
when it receives the NEXUS feed, when it sees a certain part of the code it will
know that it is, for example, the start of a new item. The Order List settings are
used to configure how WinCue orders the Runorders sent to it; the following
options are available for editing:
Start Sequence – This is used to indicate where a Runorder begins.
Sequence Name End – This is used to indicate where an individual item ends.
Sequence Separator – This is used to separate the items in a Runorder.
End Sequence – This is used to indicate where a Runorder ends.
If the Automatically create the link option is selected then items without scripts
will not be displayed in the Runorder.
WinCue Pro News Nexus User Guide 0BConfiguration
• 11