Brother MFC 7860DW - Manual (Page 138)

122
6.Network
(MFC-7860DW)
(Continued)
2.WLAN
(Continued)
2.Setup
Wizard — — You can configure
your print server.
3.WPS/AOSS — — You can easily
configure your
wireless network
settings using the
one-button push
method.
4.WPS w/PIN
Code — — You can easily
configure your
wireless network
settings using WPS
with a PIN code.
5.WLAN
Status 1.Status Active(11b)
Active(11g)
Wired LAN
Active
WLAN OFF
AOSS Active
Connection Fail
You can see the
current wireless
network status.
2.Signal Strong
Medium
Weak
None
You can see the
current wireless
network signal
strength.
3.SSID — You can see the
current SSID.
4.Comm. Mode Ad-hoc
Infrastructure
You can see the
current
Communication
Mode.
6.MAC
Address — — Shows the MAC
address of the
machine.
7.Set to
Default — 1.Reset
2.Exit
Restore the wireless
network settings to
factory default.
8.WLAN
Enable — On
Off*
Enable or disable the
wireless LAN
manually.
Level 1 Level 2 Level 3 Level 4 Options Descriptions
See Network User’s Guide.
The factory settings are shown in Bold with an asterisk.