Instant recording – Bang & Olufsen BeoCord V8000_MS - User Guide User Manual

Page 18

Advertising
background image

> Recording

18

To record the current programme…

Press to get ready for recording

Press to start recording

To record a TV programme while being
able to watch another TV programme…

Switch on to the videotape recorder

Press to get ready for recording

To record from a program number
other than the one currently on the
screen…
Press to key in another program
number

Press to start recording

You may now press TV (or SAT) to
watch any programme you like…

Press to switch to your recording

Press to pause the recording

Press to stop the recording entirely

Press to resume recording

RECORD

RECORD

then

RECORD

then

RECORD

then

V TAPE

then

0

9

through

V TAPE

STOP

then

STOP

RECORD

or

then

Instant recording

If you want to make an instant
recording of a programme you are
currently watching – all you have to do
is, start the recording.

If you make an instant recording of a
TV programme you are currently
watching, you will not be able to
watch another TV programme. You
can, of course, switch V 8000 to stand-
by, or switch to one of the other
sources available, e.g. Satellite (SAT).

If you wish to monitor or stop your
recording, you must first return to your
recording by pressing V TAPE.

If you wish to record a TV programme
and still be able to watch another TV
programme, you must record from the
tuner in the videotape recorder.

Note: When you have pressed RECORD once and
the BeoCord V 8000 is in recording pause mode,
you may choose a different source for your
recording by pressing LIST repeatedly until TURN is
displayed in the Beo4 display and then press GO.
Yet, in order to display TURN, you have to add it
to Beo4’s list of functions, please refer to Beo4’s
own User’s guide and the chapter ‘Customising
your Beo4’
for further instructions.

Note about recording Satellite…
If you record a Satellite programme, you cannot
watch another Satellite programme at the same
time, since only TV program numbers are stored in
the videotape recorder’s tuner. You can, though,
always switch to TV and watch a TV programme
instead.

Note about dual language programmes…
If you record a dual language programme, you
will hear both languages simultaneously. When
you play back the tape, you will be able to choose
which language you want. For further informa-
tion of how to switch sound or languages, see
Selecting sound track, page 21.

Advertising