Bang & Olufsen BeoCord V8000_MS - User Guide - Manual (Page 2)

2
Before you start…
Two user’s guides are enclosed with
your BeoCord V 8000. A User’s guide
which should be used, if V 8000 is
combined with a BeoVision MX TV,
and a User’s guide which should be
used, if V 8000 is combined with a
BeoVision MS TV. Choose the
appropriate guide for your system
setup. The enclosed Setting-up guide
applies to all setups.
This User’s guide explains how to fine
tune and preset your BeoCord V 8000
in a setup with an MS TV. It also
explains how to operate the various
sources and functions, using the Beo4
remote control. Complete operation
of BeoCord V 8000 is also available
via Beolink 1000.
We recommend that you (or your
Bang & Olufsen dealer) follow the
instructions in the Setting-up guide
when you set up your BeoCord V
8000. If you connect auxiliary
equipment to your system, please
refer to the Setting-up guide for
instruction.
Apart from explaining how to make
the system ready for use, the Setting-
up guide also includes maintenance
instructions.
Note: If you combine your BeoCord V 8000
with the BeoVision 1 TV, please refer to the
BeoVision 1 Reference book for information of
how to use V 8000 on a daily basis with the Beo1
remote control, and how to connect V 8000 to
BeoVision 1. You can combine BeoCord V 8000
with Bang & Olufsen TVs other than the ones
mentioned here, but please refer to the Setting-
up guide for further information.
A B O U T B E O C O R D V 8 0 0 0