Bang & Olufsen DVB-S - User Guide - Manual (Page 10)

Contents of the Installation menu…
LNB/Aerial Setup
The LNB/Aerial setup menu is used for selecting
the options corresponding to your antenna/aerial
setup:
DiSEqC switch… Enable or disable the DiSEqC
switch.
Use LNB… Determine which LNB to use.
Satellite… Select which satellite to use – the
satellite the chosen LNB is directed at.
Frequency… Set the frequency, if different from
the preset value.
Symbol Rate… Set the symbol rate to be used, if
different from the preset value.
Polarisation… Select the polarisation of the LNB, if
different from the preset value.
Program Search
In the Program Search menu, you set your
preferences for a program search:
LNB… Select which LNB to use for a program
search.
Search Filter… Select whether the satellite should
search for all channels or free to air channels
only.
Search Mode… Select either automatic or manual
program search.
Frequency… If you have chosen manual search,
you can enter a search frequency.
Symbol Rate… If you have chosen manual search,
you can set a symbol rate value.
Polarisation… If you have chosen manual search,
choose either horizontal or vertical polarisation.
Network Search… If you have chosen manual
search, you can search for all programs found in
a specifi c network by choosing ‘on’.
The installation menu is used when you want
to change your satellite setup, for example, if
you add a new LNB to your setup. It is also
used to search for satellite programs and to
fi nd information about your satellite module.
It is important that you check the signal
strength and quality in the LNB Aerial setup
menu when you make the appropriate settings.
The signal quality must be at least ‘good’ and
the signal strength must be at least 20.
When you make a manual search for satellite
programs, you can make specifi c settings for
the search. Programs found by means of a
manual search will be placed at the bottom
of the list of all tuned programs.
Note that if you reinstall all programs, your
Program Lists and Favourite Lists are reset, and
the contents of the Favourite Lists are removed.
Reinstall
In this menu you can reinstall all programs. Note
that this will delete the settings you have made for
program lists and Favourite Lists. You can stop the
scan for new programs by pressing STOP. You can
then make your own settings for a program
search, for example, to make individual program
searches for each LNB.
Edit Satellite Settings
Use this menu to change settings for a chosen
satellite. For example, you can add a new satellite
to the list of available satellites. Four satellites are
preset from the factory; Thor, Astra, Hotbird and
Sirius.
Module Information
Use this menu to see the current module version.
Also if new software has been downloaded, which
affect the operation of the satellite module, it will
be stated in this menu.
If required a guide update can be found at the
Bang & Olufsen web-site: www.bang-olufsen.com.
>> Setup menu
About the Installation menu…
10
NOTE! When you enter the LNB/Aerial setup menu
from radio mode, the satellite module changes to
TV mode.