Brother DCP-110C - Manual (Page 48)

WALK-UP PHOTOCAPTURE CENTER ™ 3 - 9
Changing the default settings
You can save the PhotoCapture Center
™
settings you use most often
by setting them as default. These settings will remain until you
change them again.
Increasing print speed or quality
1
Press Menu .
2
Press or to select 2.PhotoCapture .
Press Set .
3
Press or to select 1.Print Quality .
Press Set .
4
Press or to select Normal or Photo .
Press Set .
5
Press Stop/Exit .
Setting paper and size
1
Press Menu .
2
Press or to select 2.PhotoCapture .
Press Set .
3
Press or to select 2.Paper & Size .
Press Set .
4
Press or to select Letter Glossy , 10x15cm Glossy ,
13x18cm Glossy , A4 Glossy , Letter Plain , A4 Plain ,
Letter Inkjet , A4 Inkjet or 10x15cm Inkjet .
Press Set .
5
If you selected A4 or Letter , press or to select the print
size ( 10 x 8cm , 13 x 9cm , 15 x 10cm , 18 x 13cm ,
20 x 15cm or Max. Size ).
Press Set .
6
Press Stop/Exit .