Bang & Olufsen BeoSound 1 - User Guide - Manual (Page 21)

Change your PIN code
You can change your PIN code at any time.
However, for security reasons it is only possible
to change the PIN code five times within a
period of 3 hours. You must enter your current
PIN code before changing the code.
Press twice when the set is in
standby
Press STOP to key in the
fourdigit PIN code
Pin appears briefly, and then
four squares appear
Press or repeatedly to reveal
digits
The squares changes to
underscores and the first digit is
shown in the display
Press STORE to accept the
displayed digit and proceed to
the next
The digit is replaced by a square
and the next underscore will
blink
Press STORE when the last digit
is entered
Pin appears briefly, then the
display returns to four underscores
and you must enter a new PIN
code and confirm it
Deactivate the PIN code system
You can deactivate the PIN code system at any
time. All you need to do is enter your PIN code
first and then you can deactivate the system.
Press twice when the set is in
standby
Press STOP to key in the
fourdigit PIN code
Pin appears briefly, and then
four squares appear
Press or repeatedly to reveal
digits
The squares changes to
underscores and the first digit is
shown in the display
Press STORE to accept the
displayed digit and proceed to
the next
The digit is replaced by a square
and the next underscore will
blink
Press STORE when the last digit
is entered
Pin appears briefly, then the
display returns to four
underscores
Press DELETE to deactivate the
PIN code system
DEL appears in the display
Press STORE to deactivate the
PIN code system
If you have forgotten your PIN code
If you have forgotten your PIN code, you must
contact a retailer who then requests a fivedigit
Master code from Bang & Olufsen. Once you
have keyed in this code, your BeoSound 1 is
operational again and the PIN code system is
deactivated.
The cue Pin is displayed shortly
The display changes to four
squares
Press for 3 seconds to open for
Master code input
The squares changes to
underscores and the first digit is
shown in the display
Then the display changes to two
rows of lines
Press or repeatedly to reveal
digits
The first digit is shown in the
display
Press STORE to accept the
displayed digit and proceed to
the next
The digit is replaced by a square
and the next underscore will
blink
Press STORE to accept the fourth
digit when it is displayed
The display changes and a fifth
digit can be entered
Enter the fifth digit and press
STORE
DEL appears in the display
indicating that the PIN code
system is deactivated
21
STOP
Pin
oooo
3 _ _ _
STORE
o _ _ _
STORE
Pin
_ _ _ _
STOP
Pin
oooo
3 _ _ _
STORE
o _ _ _
STORE
Pin
_ _ _ _
DELETE
dEL
STORE
Pin
oooo
9 _ _ _
= = = =
3 = = =
STORE
o = = =
STORE
=
STORE
dEL