Baumfolder BAUM20: Pile Folder 1st Station (early 2006) - Manual (Page 43)

PAGE 43 TP10243-4
SCORING/SLITTING/PERFING
Your new folder is capable of many different applications that compliment the folding performance and provide for
greater productivity.
The folder is equipped with slitter shafts that are quickly set up for the required operation. These shafts accommodate
the mounting of the standard and optional accessories available that perform scoring, slitting and perforating functions.
1.0 Slitter Shaft Accessories Removal
To remove slitter shafts, carefully remove both knobs while supporting shafts by hand to prevent slitter assembly from
pivoting outward. (Figure 29-1). Once knobs have been removed, pivot slitter assembly outward away from machine. Add
or remove the parts needed for the current job using the wrench provided with the machine. See the following pages for
more information on perfing, scoring, and slitting. Reinstall slitter housing and knobs before starting the machine.
Figure 29
2 1
1