Baumfolder BAUM20: Pile Folder 1st Station (from 2002 thru 2004) User Manual
Page 16
TP10243-2
PAGE 16
EXAMPLE: Hold the
MINUS Button, this will automatically count back to P00
(group P0). Now by Pressing the
Button will take you to the next
Parameter Group P10 P20 - P30 P40 P50 P60
2.
Pressing
and
directly UNDER the left 3 digits of the Large 8 digit
display, this will select the individual Parameters in a select group.
EXAMPLE: Start with the first Group of Parameters, the 3 digit
display reads P00. Pressing the
this will take you to Parameters
P01 P02 P03 P04 P05
- To go to the next Group of Parameters Press
The display will show P10. Pressing the button
will take you to Parameters P11 P12 P13 P14 (continue this sequence
to move thru the rest
of the Parameter Groups P20 P30 P40 P50 P60
3. To change one of the machines Parameter Settings Press
or
Buttons UNDER the right most 2 digits of the large 8 digit display.
The following is a list of the available parameters. Please see the Operators Manual for a defini-
tion of each parameter.