Baumfolder BAUM20: Ifold Operation Manual - Manual (Page 8)

Touch one of these boxes to
select a paper size.
A
on the button indicates that pape
r size will not run on your m
achine
This box shows how the paper is lo
aded (label or address face
down and forward). You can ch
ange this from
portrait
(shown) to Landscape and back
by touching the orientation
button.
Touch this box to change
from
inch to m
etric
Touch these boxes to enter a custom
paper size. When you touch a box
a keypad will pop up. Using the keypad enter the paper custom paper
size. Do this for both the width and length.
TP10509 Page 6 of 29