Baumfolder BaumCut 26.4 (For serials 78D1101 thru current) - Manual (Page 13)

K1 - 5
1 2 3 4 5 6
7 8 9
C 0
x D i
PROGRAMMABLE
Power Supply
1.0 Technical Data / Machine Layout / Transport and Installation of the Machine / Safety Relevant Machine Elements
The machine is to be connected by an authorized electrician, only!
Connect machine according to diagram!
Energy supply is made from the rear of the machine.
Power supply is located within the connection box; access via front guard.
• When the system is operated with residual current breaker, use a resi-
dual current breaker ( > 30 mA ) for each machine!
• All cables designated , and all cables with orange cladding will
remain live even after turning off at the main switch!
Rear side
Front side (Operating side)
Energy
lead wire