Baumfolder BaumCut 26.4 (For serials 78D1101 thru current) User Manual
Page 43
Advertising
K5A - 9
Program data display:
5.0 Automatic Operation
after 1. input:
input section shows 30.735
after 2. input :
backgauge moves
after backgauge stops:
measurement display shows 30.735
Conditions: Automatic OFF
A Measurement input with metric system (cm)
Example:
Size
Key input
1.
30,735
2.
Positioning, press
2 x shortly
________________________________________________________________
B Measurement input in inches
Same way of input as for metric system
however
value in inches entered as a fraction:
Example:
Size
Key input
1.
12
1/2
"
2.
Positioning, press
2 x shortly
Note:
For whole sizes (no digits behind decimal point) zeroes do not have to be
keyed in. This is done automatically.
Automatic Backgauge Adjustment through Numerical Keyboard
Advertising