Baumfolder 714XLT: Air-Operations Manual (from 2006) - Manual (Page 6)

TP10289-3 PAGE 6
The first notch in the front part of the feed table
should rest on the pins. Then drop the rear notch down on
the upper dowel pins.
Rotate the handwheel to check that the gears are
properly meshed.
Connect the feed table hoses. Push the fittings into
the holes in the manifold block. (See Figure 4.6-2)
Figure 4.6-1
Feed Table
Hoses
Air
Vacuum
Pump
Hoses
Figure
4.6-2
4.5 Delivery Table
To install the delivery table, loosen the knobs on
either side of the stacker table. Drop the tray over the
knobs and retighten.
4.6 Feed Table Assembly Installation
Insert the feed table with the feed wheel toward the
fold rolls. Slide the paper feed table over both
sets of locating pins. (See Figure 4.6-1)
Figure
4.5-1