Baumfolder 714XLT: Set up - Manual (Page 11)

How to install or remove score
blades on a 714XLT
(Continued from previous page)
11. Slide the left pullout tire assembly directly under pullout tire on the top slitter shaft and tighten the
setscrew to hold the pullout assembly in place.
12. Replace the left slitter shaft boxing and tighten the socket head bolt into the tie bar
13. Replace slitter shaft assembly into the folder in reverse order it was removed.
14. Replace feed table in reverse order removed.
15. Turn the folder by hand to insure nothing is loose or rubbing and that everything is free.
16. Set up folder and run sheet through by hand and move perforator into position desired and lock
any setscrews you may have moved. Turn another sheet through by hand, and if ok, plug in
folder.
17. Turn on and run a sheet through and check fold and location. If ok run job.
Continued on next page…
Baumfolder Corporation P.O. Box 728 1660 Campbell Rd, Sidney, Ohio USA 45365 Copyright © 2002
Phone 1-800-543-6107 or 1-937-492-1281 Fax 1-937-492-7280 email: [email protected]